Client List Screen - ZyXEL Communications LTE3301-M209 User Manual

9.4 Client List Screen

The DHCP table shows current DHCP client information (including IP Address, Host Name and MAC
Address) of network clients using the Zyxel Device's DHCP servers.
Configure this screen to always assign an IP address to a MAC address (and host name). Click Network
> DHCP Server > Client List.
Note: You can also view a read-only client list by clicking Monitor > DHCP Server.
Figure 55 Network > DHCP Server > Client List
The following table describes the labels in this screen.
Table 36 Network > DHCP Server > Client List
LABEL
#
Status
Host Name
IP Address
MAC Address
Reserve
Apply
Cancel
Chapter 9 DHCP Server
DESCRIPTION
This is the index number of the host computer.
This field displays whether the connection to the host computer is up (a yellow bulb) or down (a
gray bulb).
This field displays the computer host name.
This field displays the IP address relative to the # field listed above.
This field shows the MAC address of the computer with the name in the Host Name field.
Every Ethernet device has a unique MAC (Media Access Control) address which uniquely
identifies a device. The MAC address is assigned at the factory and consists of six pairs of
hexadecimal characters, for example, 00:A0:C5:00:00:02.
Select this if you want to reserve the IP address for this specific MAC address.
Click Apply to save your changes.
Click Cancel to reload the previous configuration for this screen.
LTE3301-M209 User's Guide
86