Tutorials; Chapter 5 Tutorials; Overview; How To Connect To The Internet From An Ap - ZyXEL Communications NBG-418N v2 User Manual

5.1 Overview

This chapter provides tutorials for your NBG-418N v2 as follows:
•

How to Connect to the Internet from an AP

•

Configure Wireless Security Using WPS on both your NBG-418N v2 and Wireless Client

• Enable and Configure Wireless Security without WPS on your NBG-418N v2
• Using Multiple SSIDs on the NBG-418N v2
• Using Bandwidth Management on the NBG-418N v2
5.2 How to Connect to the Internet from an AP
This section gives you an example of how to set up an access point (AP) and wireless client (a
notebook, B in this example) for wireless communication. B can access the Internet through the AP
wirelessly.
Figure 30 Wireless AP Connection to the Internet
B
5.3 Configure Wireless Security Using WPS on both your
NBG-418N v2 and Wireless Client
This section gives you an example of how to set up wireless network using WPS. This example uses
the NBG-418N v2 as the AP and NWD210N as the wireless client which connects to a notebook.
Note: The wireless client must be a WPS-aware device (for example, a WPS USB adapter
or PCI card).
There are two WPS methods for creating a secure connection. This tutorial shows you how to do
both.
C
H A PT ER
AP
NBG-418N v2 User's Guide
44
5

Tutorials