ZyXEL Communications NBG-418N v2 User Manual page 26

Figure 13 Wizard Step 2: Wireless LAN
The following table describes the labels in this screen.
Table 6 Wizard Step 2: Wireless LAN
LABEL DESCRIPTION
Wireless LAN
Disable the Click this check box to disable the WLAN in the NBG-418N v2.
wireless radio
SSID Enter a descriptive name (up to 32 printable 7-bit ASCII characters) for the wireless LAN.
If you change this field on the NBG-418N v2, make sure all wireless stations use the same
SSID in order to access the network.
Channel The range of radio frequencies used by IEEE 802.11b/g/n wireless devices is called a
channel.
Set the operating frequency/channel depending on your particular region. Select a channel
from the drop-down list box. The options vary depending on the frequency band and the
country you are in.
Mode Select the IEEE 802.11 WLAN mode you wish to use on the NBG-418N v2 from the drop-
down list.
Channel Width Select the channel bandwidth you want to use for your wireless network.
Select Auto 20/40 MHz to allow theNBG-418N v2 to adjust the channel bandwidth to 40
MHz or 20 MHz depending on network conditions.
Select 20 MHz if you want to lessen radio interference with other wireless devices in your
neighborhood.
Wireless Security
Disable Security Click this check box to disable security settings for the WLAN.
Chapter 3 Connection Wizard
NBG-418N v2 User's Guide
26