ZyXEL Communications NBG-418N v2 User Manual page 43

The following table describes the sub-menus.
Table 15 Menu: Universal Repeater Mode
LINK TAB
Status
Network
WLAN AP Select
General
MAC Filter
Advanced
QoS
WPS
WPS Station
Scheduling
LAN IP
Maintenance
System General
Time Setting
Logs View Log
Tools Firmware
Configuration
Restart
Sys OP Mode General
Language Language
Chapter 4 Modes
FUNCTION
This screen shows the NBG-418N v2's general device, system and
interface status information. Use this screen to access the wizard, and
summary statistics tables.
Use this screen to choose an access point that you want the NBG-418N v2
to connect to. You should know the security settings of the target AP.
Use this screen to configure wireless LAN.
Use the MAC filter screen to configure the NBG-418N v2 to block access
to devices or block the devices from accessing the NBG-418N v2.
This screen allows you to configure advanced wireless settings.
Use this screen to configure Wi-Fi Multimedia Quality of Service (WMM
QoS). WMM QoS allows you to prioritize wireless traffic according to the
delivery requirements of individual services.
Use this screen to configure WPS.
Use this screen to add a wireless station using WPS.
Use this screen to schedule the times the Wireless LAN is enabled.
Use this screen to configure LAN IP address and subnet mask.
Use this screen to view and change administrative settings such as
system and domain names, password and inactivity timer.
Use this screen to change your NBG-418N v2's time and date.
Use this screen to view the logs for the categories that you selected.
Use this screen to upload firmware to your NBG-418N v2.
Use this screen to backup and restore the configuration or reset the
factory defaults to your NBG-418N v2.
This screen allows you to reboot the NBG-418N v2 without turning the
power off.
This screen allows you to select the device operation mode: Router,
Access Point, or Universal Repeater.
This screen allows you to select the language you prefer.
NBG-418N v2 User's Guide
43