ZyXEL Communications NBG-418N v2 User Manual page 73

Figure 51 Network > Wireless LAN > MBSSID
The following table describes the labels in this screen.
Table 26 Network > Wireless LAN > MBSSID
LABEL DESCRIPTION
Network Profiles
Select Click the Select radio button to select the Multiple Basic Service Set Identifier (MBSSID)
you wish to edit.
Scheme This field displays the index number of the SSID.
SSID This field displays the SSID name of the Wireless client.
Security This field displays the Security mode of the wireless client. If there's no security, it will
display None.
Apply This field displays whether the Enable Guest Network check box of the SSID is enabled.
SSID Broadcast This field displays whether the Enable SSID Broadcast check box of the SSID is
enabled.
Wireless Settings--Profile 1
Enable Guest Click the Enable Guest Network check box to enable this SSID wireless client.
Network
Enable SSID Click the Enable SSID Broadcast check box to activate the SSID broadcast to different
Broadcast wireless clients.
Allow Guest to Click the Allow Guest to access my Local Network check box to allow the client to
access My Local access the local network resources behind the NBG-418N v2.
Network
Enable Wireless Click the Enable Wireless Isolation check box to keep the wireless clients in this SSID
Isolation from communicating with each other through the NBG-418N v2.
Name (SSID) This field displays the SSID name you selected using the select radio button.
Security Options--Profile1
Security Mode Select Basic WEP or More Secure WPA2-PSK to add security on this wireless network.
The wireless clients which want to associate to this network must have same wireless
security settings as the Device. When you select to use a security, additional options
appears in this screen.
Or you can select No Security to allow any client to associate this network without any
data encryption or authentication.
See the following sections for more details about this field.
Chapter 6 Wireless LAN
NBG-418N v2 User's Guide
73