ZyXEL Communications NBG-418N v2 User Manual page 117

The following table describes the labels in this screen.
Table 49 Management > Remote MGMT > WWW
LABEL
Enable WWW
Server Port
Secured Client WAN IP
Address
Apply
Reset
Chapter 13 Remote Management
DESCRIPTION
Click the Enable WWW check box to configure your NBG-418N v2 via HTTP using
a web browser.
You may change the Server port number for a service if needed, however you
must use the same port number in order to use that service for remote
management.
A secured client is a "trusted" computer that is allowed to communicate with the
NBG-418N v2 using this service.
Select All to allow any computer to access the NBG-418N v2 using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the NBG-418N v2 using this service.
Note: This only applies on WAN IP.
Click Apply to save your customized settings and exit this screen.
Click Reset to begin configuring this screen afresh.
NBG-418N v2 User's Guide
117