Dhcp Client List Screen - ZyXEL Communications LTE3301 Series User Manual

9.4 DHC P C lie nt L ist Sc re e n
The DHCP table shows current DHCP client information (including IP Address, Host Name and MAC
Address) of network clients using the LTE3301's DHCP servers.
Configure this screen to always assign an IP address to a MAC address (and host name). Click
> DHC P Se rve r > C lie nt L ist
Note: You can also view a read-only client list by clicking
Network > DHCP Server > Client List
Fig ure 53
The following table describes the labels in this screen.
Table 35 Network > DHCP Server > Client List
L ABEL
#
Status
Host Name
IP Address
MAC Address
Reserve
Apply
Cancel
Chapter 9 DHCP Server
.
DESC RIPT IO N
This is the index number of the host computer.
This field displays whether the connection to the host computer is up (a yellow bulb) or down (a
gray bulb).
This field displays the computer host name.
This field displays the IP address relative to the # field listed above.
This field shows the MAC address of the computer with the name in the
Every Ethernet device has a unique MAC (Media Access Control) address which uniquely
identifies a device. The MAC address is assigned at the factory and consists of six pairs of
hexadecimal characters, for example, 00:A0:C5:00:00:02.
Select this if you want to reserve the IP address for this specific MAC address.
Click to save your changes back to the LTE3301.
Apply
Click to reload the previous configuration for this screen.
C a nc e l
LTE3301 Series User's Guide
Mo nito r > DHC P Se rve r
86
Ne two rk
.
field.
Ho st Na m e