Stopper Release Control - Konica Minolta DF-606 Service Manual

Theory of Operation Ver1.0 Jun.2005
5.2.3

Stopper release control

A. Stopper release while in the trimming mode
After completion of the stopper evacuation movement [2] described in the previous section, the stopper release
motor (M104) turns ON to start the stopper release [3] operation. When M104 turns OFF with the stopper
release home sensor (PS104) OFF, the stopper is brought down. In this way, the conveyance path for paper exit
is secured.
Conveyance motor (M101)
Entrance sensor (PS101)
Stopper motor (M103)
Conveyance sensor (PS102)
Press motor (M105)
Blade motor (M102)
Stopper release motor (M104)
Stopper release home sensor (PS104)
[1] FS folding transfer motor (M20) ON
[2] Evacuation operation of the stopper
[2]
[1]
[3] Release operation of the stopper
5. Press section
[3]
15smt2c009na
13