Konica Minolta DF-606 Service Manual page 81

Theory of Operation Ver2.0 Aug.2005
(3) Folding/saddle stitching mode
Transmitting the FS operation signal from the main body [1], the M13 turns ON and rotates in high speed.
M13 rotates in low speed [2] to transfer the paper in low speed when the PS5 detects the trailing edge of the
paper. M13 rotates in high speed and stands by for the subsequent paper a specified period of time after it
rotates in low speed.
M13 stops after completing the alignment operation [4] of the last paper of the copy [3].
M13 turns ON and rotates in high speed to stand by for the subsequent paper when the folding paper exit sen-
sor (PS25) detects the trailing edge of the paper bundle [5].
Stacker entrance sensor (PS5)
Stacker entrance
motor (M13)
Alignment motors /Up (M5) and /Lw (M16)
Folding paper exit sensor (PS25)
[1] FS operation start signal turned ON
[2] Paper transferred to the stacker in low speed
[3] Last paper of the copy
High speed
Low speed
[1]
7. STACKER SECTION (FS-604)
[3]
[2] [4] [5]
[4] Last paper of the copy aligned
[5] Folding paper exit operation
[6] Standing by for the paper of the subsequent
copy
[6]
15sjt2c031na
47