Table of Contents
Advertisement
5. Press section
B. Stopper release while in the through mode
After completion of the stopper evacuation movement [2] described in the previous section, the stopper release
motor (M104) turns ON a specified period of time after the conveyance motor (M101) turns OFF to start the
stopper release [3]. When M104 turns OFF with the stopper release home sensor (PS104) OFF, the stopper is
brought down. In this way, the conveyance path for paper exit is secured.
Conveyance motor (M101)
Entrance sensor (PS101)
Stopper motor (M103)
Conveyance sensor (PS102)
Press motor (M105)
Blade motor (M102)
Stopper release motor (M104)
[1]
FS folding transfer motor (M20) ON
[2]
Evacuation operation of the stopper
C. Stopper reset
When the paper exit conveyance operation causes the exit sensor (PS108) to detect the trailing edge (trimming
side) of the booklet, the stopper release motor (M104) turns ON again to start the stopper setting operation.
When the stopper release home sensor (PS104) turns ON, M104 turns OFF to stand the stopper on end. In this
way, the stopper is being set.
14
[2]
[1]
[3]
[3]
Release operation of the stopper
Theory of Operation Ver1.0 Jun.2005
15smt2c010na
Advertisement
Chapters
Table of Contents
