Stapler Movement Control - Konica Minolta DF-606 Service Manual

9. STAPLER (FS-604)
B. Stapler movement control
(1) 1 staple/front and 2 staples
Transmitting the FS operation signal from the main body, the stapler movement motor (M11) turns ON to widen
the distance between stapler and clincher. It stops when they are positioned at the specified positions.
M11 turns ON a specified period of time after the main tray paper exit sensor (PS6) detects the last paper. M11
stops when the stapler movement home sensor (PS11) turns ON.
(2) 1 staple/one-corner stapling at rear
Transmitting the FS operation signal from the main body [1], the M11 turns ON to widen the distance between
the stapler and the clincher [2]. The stapler rotation motor (M6) and the clincher rotation motor (M4) turn ON to
rotate the stapler /Rr and the clincher /Rr and move them diagonally [3] a specified period of time after M11
turns ON.
M4 and M6 turn ON and rotate the stapler /Rr and the clincher /Rr to the home position [5] a specified period of
time after the trailing edge of the last paper passes the PS6. The rotations are stopped when the stapler rotation
home sensor (PS13) and the clincher rotation home sensor (PS14) turn ON. At the same time, M11 turns ON [6],
and it stops when the PS11 turns ON.
Stapler movement home sensor (PS11)
Stapler movement
motor (M11)
Stapler rotation home sensor (PS13)
Stapler rotation
motor (M6)
Clincher rotation home sensor (PS14)
Clincher rotation
motor (M4)
Stapler motor /Rr (M9)
Clincher motor /Rr (M10)
Main tray paper exit sensor (PS6)
[1] FS operation start signal turned ON
[2] Stapler /Rr and clincher /Rr moving horizon-
tally
[3] Stapler /Rr and clincher /Rr rotating 45°
58
[2]
CLOSE
OPEN
Forward
Reverse
Forward
Reverse
[1] [3]
Theory of Operation Ver2.0 Aug.2005
[6]
[4]
[5]
[4] Stapling operation
[5] Stapler /Rr and clincher /Rr moving to the
home position rotational
[6] Stapler /Rr and clincher /Rr moving to the
home position horizontally
15sjt2c037na