Table of Contents
Advertisement
7. Stacker section
C. Stacker full detection control
The booklets pushed out from the paper exit path are held between the pusher plate and the paper exit tray to
be stacked in an upright posture.
When the booklets that have been stacked get to the specified thickness, the stacker full sensor (PS113) [1]
turns ON with a message informing the stacker full condition displayed on the main body operation panel.
D. Safety mechanism
When the stacker door is opened while in the operation of this machine, the stacker interlock switch /1 (MS3) [1]
and the stacker interlock switch /2 (MS4) [2] turn OFF. In this manner, the drive signal paths of the holder motor
(M106) and the pusher motor (M107) are blocked to stop the operation of the machine.
At this time, the stacker door sensor (PS114) [3] also turns OFF with an error message displayed on the main
body operation panel.
[3]
[2]
22
[1]
Theory of Operation Ver1.0 Jun.2005
[1]
15smt2c019na
15smt2c020na
Advertisement
Chapters
Table of Contents
