Konica Minolta DF-606 Service Manual page 56

4. CONVEYANCE SECTION
(2) Stapling mode (when the size in the sub scan direction is B5R or longer)
The FS operation signal [1] from the main body allows the paper exit motor (M8) to rotate [2] to open the paper
exit opening.
Upon completion of the stapling operation, M8 turns ON [3] again to start the closing operation of the paper exit
opening, and it turns off when the paper exit home sensor (PS12) detects [4] the close position.
This operation is repeated for each bundle of paper to be stapled.
Stapler motor /Fr (M14)
Stapler motor /Rr (M9)
Paper exit opening solenoid (SD4)
Paper exit home sensor (PS12)
Paper exit motor (M8)
[1] FS operation start signal turned ON
[2] Start of the opening operation of the paper
exit opening
[3] Start of the closing operation of the paper
exit opening
22
1
[1] [2]
[4]
[5]
Theory of Operation Ver2.0 Aug.2005
[3]
Paper exit opening being closed
Paper nip by means of the paper exit open-
ing solenoid (SD4)
[5]
[4]
15sft2c016na