Operation; Reverse Mechanism - Konica Minolta DF-606 Service Manual

Theory of Operation Ver1.0 Jun.2005
6.2

Operation

6.2.1

Reverse mechanism

A. Small size original
When the gate solenoid (SD303) starts up, the flapper [3] closes and originals the front face of which has been
scanned are conveyed [2] to the reverse section by the reverse roller [1]. A specified period of time after the orig-
inal reverse sensor (PS309) [7] turns OFF by detecting the trailing edge of the original, SD303 opens the paper
exit gate [6] and the reverse paper feed [5] is made while rotating in the reverse direction at a low speed and
then at a high speed to guide the original to the conveyance roller [4].
[5]
[4]
[1] Reverse roller
[2] Conveyance to the reversal section
[3] Flapper
[4] Conveyance roller
[6] [7]
[3] [2]
[1]
[5] Reverse paper feed
[6] Paper exit gate
[7] PS309
6. REVERSAL SECTION
15sat2c013na
17