Table 6.14 Messages In The [Periodical Connection Settings] Window; Table 6.15 Messages In The [Customer Information] Window - Fujitsu Primequest 2000 Series Installation Manual

CHAPTER 6 REMCS Messages
6.1 Messages in REMCS Windows
RMG_0095
RMG_0181
RMG_0189
RMG_0207
RMG_0208
Message code
RMG_0001
RMG_0002
RMG_0004
RMG_0006
RMG_0015
RMG_0016
RMG_0018
RMG_0027
RMG_0036
RMG_0048
RMG_0049
RMG_0050
RMG_0051
RMG_0052
RMG_0054
RMG_0056
RMG_0186
RMG_0187
Message code
RMG_0001
RMG_0002
RMG_0004
Connection type mismatch.
Invalid E-mail address specified.
Execute registration of REMCS environment
data.After this operation, all events are not
sent to the REMCS Center until connection
check is completed.
\nAre you sure?
Invalid value in [Split size].Please specify it
within the range of 10-100.
Invalid value in [Split size].Please specify it
within the
range of 64-512.

TABLE 6.14 Messages in the [Periodical Connection settings] window

Failed to get Machine status. (xxx)
Failed to make frame screen data. (xxx)
Invalid CGI parameter specified.
Failed to get connect mode. (xxx)
Invalid entry.
Input value is out of range.
Failed to get registration data.(xxx)
Failed to change Machine status. (xxx)
Required entry.
Invalid end time.
Execute registration of periodical connection
schedule. Are you sure?
Periodical Connection setting frame display
completed.
Failed to register the periodical connection
schedule. (xxx)
Failed to set the periodical connection
schedule. (xxx)
Registration of the periodical connection
schedule
completed.
Failed in the connection check
notification.(xxx)
Failed to send notice of changing agent
information.
Failed to send agent information.

TABLE 6.15 Messages in the [Customer Information] window

Failed to get Machine status. (xxx)
Failed to make frame screen data. (xxx)
Invalid CGI parameter specified.
Message
Message
57
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
Enter a valid value.
Click the [OK] or [Cancel]
button.
Enter a valid value.
Action
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
Correct the entered value.
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
Enter a valid value.
Confirm the start time and
set a valid end time.
Click the [OK] or [Cancel]
button.
None.
Check whether the network
status is normal.
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
None.
Check whether the network
status is normal.
Action
If the error still occurs when
you retry the operation, exit
and restart the REMCS
CA92344-0542-02