Remcs Service Menu; Customer Information Update; Re-Register; Connection Environment - Fujitsu Primequest 2000 Series Installation Manual

CHAPTER 4 REMCS Service Operations

4.2 REMCS Service Menu

HW Config. Info.
Exit
4.2 REMCS Service Menu
This section describes the REMCS service menu items.

4.2.1 Customer Information update

Use this menu item to confirm the customer information entered on registration or to change the information
such as the administrator name or company address.
The procedure for displaying and confirming the customer information is as follows.
1. From the menu in the window shown in
update].
The [Customer Information] window appears.
2. If your purpose is confirmation only, click the [Cancel] button. If you want to update the information,
change the relevant value and click the [Next] button.
The [Customer Information Review] window appears.
3. Confirm the information. If everything is correct, click the [Next] button. The
Transmit Agreement] window
[Back] button to return to the [Customer Information Review] window.
4. After confirming that your environment is enabled for sending e-mails, click the [Agree] button. The
entered information is automatically sent to the REMCS Center. When the e-mail transfer is completed,
the [Registration result] window appears.
5. Click the [Next] button to return to the initial window.
- The administrator's e-mail address entered in the [Customer Information] window receives an e-mail
notification of completed registration.
- Any updates to the user registration information before receiving the e-mail notification should be
invalid. Be sure to update the information after receiving the e-mail notification of completed
registration.

4.2.2 Re-register

You can use this menu item only when you have not yet registered customer information after updating it in
the [Customer Information] window.
The procedure for re-registration is as follows.
1. From the menu in the window shown in
FIGURE 3.10 [Information Transmit Agreement] window
After confirming that your environment is enabled for sending e-mails, click the [Agree] button. The
2.
entered information is automatically sent to the REMCS Center. When the e-mail transfer is completed,
the [Registration result] window appears.
Click the [Next] button to return to the window shown in
3.
- The administrator's e-mail address entered in the [Customer Information] window receives an e-mail
notification of completed registration.
-
Any updates to the user registration information before receiving the e-mail notification should be
invalid. Be sure to update the information after receiving the e-mail notification of completed
registration.

4.2.3 Connection Environment

Use this menu item to display the current connection information or to change the setting information such
as the mail server setting.
The procedure for displaying and confirming the connection information is as follows.
1. From the menu in the window shown in
- If your environment is set for Internet Connection(Mail Only), the window shown in
[Internet (Mail Only) connection environment settings] window
- If your environment is set for other connection types,the window shown in
Sends the software configuration information.
Exits the REMCS operations and closes the browser window.
FIGURE 4.1 [REMCS initial]
appears. If you find any wrong information and need to correct it, click the
FIGURE 4.1 [REMCS initial]
FIGURE 4.1 [REMCS initial]
30
window, click [Customer Information
FIGURE 3.10 [Information
window, click [Re-register].The
appears.
FIGURE 4.1 [REMCS initial]
window, click [Connection Environment].
appears.
FIGURE 4.3 [Point-to-Point
window.
FIGURE 4.2
CA92344-0542-02