Fujitsu Primequest 2000 Series Installation Manual page 44

CHAPTER 3 REMCS Service Start Procedure
3.5 The notes about the importing and the automatic registration procedures of the REMCS settings
The following cases(1-3) show the trouble's sequences.
< Term definition >
・SMTPs unused : "Type of encrypted connection" is set "None".
・SMTPs use
[Case1]
-
In the condition that PRIMEQUEST 1000 is connected SMTP Server A by 2 with the setting 1.
-
If the setting of 3 is imported by 4, "SMTPs use" as 5 is taken. (That cases trouble.)
-
As a result, PRIMEQUEST 1000 can connect SMTP Server B by 6.
-
When you restore the setting of the SMTP Server from B to A by REMCS-GUI as 7, the setting of
"SMTPs use" remains in the setting of PRIMEQUEST 1000 as 8.
That makes impossible to connect SMTP Server A that could be connected by 9.
: "Type of encrypted connection" is set "STARTTLS" or "SSL/TLS".
26
CA92344-0542-02