CHAPTER 6 REMCS Messages
6.1 Messages in REMCS Windows
CHAPTER 6
This chapter describes the major error messages that are displayed in the windows.
6.1
Messages in REMCS Windows
This section describes the messages displayed in the REMCS windows.
In the messages, xxx represents a character string such as a returned value that should be replaced when
printed out.
Message code
RMG_0150
RMG_1121
RMG_1123
RMG_1125
RMG_1135
Message code
RMG_0001
RMG_0002
RMG_0007
RMG_0012
RMG_0018
RMG_0041
RMG_0164
RMG_0165
RMG_0166
RMG_0167
RMG_0172
RMG_0188
RMG_0193
Message code
RMG_0001
RMG_0002
RMG_0004
REMCS Messages
TABLE 6.1 Messages common to all windows
Message
Failed to read setting file. (xxx)
This session was disconnected.(xxx)
This session was disconnected.
Session timeout.
This session was disconnected.
TABLE 6.2 Messages at GUI startup
Message
Failed to get Machine status. (xxx)
Failed to make frame screen data. (xxx)
Failed to get Machine ID..(xxx)
Change language to English.
Failed to get registration data..(xxx)
Failed to setting Machine status.(xxx)
Failed to change language to Japanese.(xxx)
Failed to change language to English.(xxx)
Change language to Japanese completed.
Changing language to English completed.
Failed to get Destination information. (xxx)
The setting file error was detected and
initialized it.
The REMCS frame is not displayed, because
the
REMCS module is not available.
TABLE 6.3 Messages in the menu frame
Message
Failed to get Machine status. (xxx)
Failed to make frame screen data. (xxx)
Invalid CGI parameter specified.
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
If operations need to be
performed in the REMCS
window, restart the REMCS
window.
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
None.
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
Proceed with registration.
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
Perform registration.
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
52
Action
Action
Action
CA92344-0542-02