Chapter 5 Remcs Service Detail Settings; Overview Of Remcs Service Detail Settings; Figure 5.1 Fe Operation Initial Window; Table 5.1 Items Of The Fe Operation Initial Window - Fujitsu Primequest 2000 Series Installation Manual

Remcs installation manual
Hide thumbs Also See for Primequest 2000 Series:
Table of Contents

Advertisement

CHAPTER 5 CHAPTER 5 REMCS Service Detail Settings

5.1 Overview of REMCS Service Detail Settings

CHAPTER 5
This chapter describes the detail settings of the REMCS service.
5.1
Overview of REMCS Service Detail Settings
REMCS Service Detail Settings are used to make detailed settings such as the transmission retry count and
timeout triggers for avoiding transmission problems. They are also used to change the REMCS Center to
connect to, switch the machine name to be displayed, and for other purposes.
Normally, these settings need not be used. Use them when so instructed by a field engineer or the support
center.
To start the window to be used for the REMCS service detail settings, select [Maintenance] - [REMCS] -
[Detail Setup] from the MMB Web-UI.
The initial window shown in
Detail environment settings
Selecting REMCS Center
Select language
Machine name display
change
Deleting the personal
information
Display of SSL Certificate
CHAPTER 5 REMCS Service
Detail Settings

FIGURE 5.1 FE operation initial window

FIGURE 5.1 FE operation initial window

TABLE 5.1 Items of the FE operation initial window

Item
Change the timeout triggers, the retry count, etc., that are applicable
when the Internet is used.
Changes the REMCS Center to connect to.
Switches the displayed language between Japanese and English.
Specifies whether to use the machine ID or a unique name as the
machine name displayed by the Web-GUI.
Deletes the personal information included in the customer
information.
SSL certificate acquired by SMTP server will be displayed when
sending is done on SMTPoverSSL (*1). If SSL certificate does not
exist, following message will appear:
" RMG_0229: TBD "
*1: When STARTTLS or SSL/TLS is selected as type of encryption
connection on [Environment settings] window
appears.
Description
44
CA92344-0542-02

Advertisement

Table of Contents
loading

This manual is also suitable for:

Primequest 2000 series

Table of Contents