CHAPTER 6 REMCS Messages
6.3 Other Error Messages
RMG_2012
RMG_2013
6.3
Other Error Messages
If an error message not listed above is displayed, exit and restart the REMCS window and try again.
If the problem is not solved, contact the support center.
on SMTP server.
(Message from the POP3 server)
xxxxxxxxxxxxxxxxxxxx
RL:xxx,ML:xxx
(SMTP)An error was detected during communication to the
specified mail(SMTP) server.
The specified SMTP server does not support SMTP AUTH. Or
the SMTP server does not support specified auth type.
The following causes can be considered.
- Specified SMTP server is wrong.
- Specified auth type is wrong.
(Message from the SMTP server)
xxxxxxxxxxxxxxxxxxxx
RL:xxx,ML:xxx
(SMTP) The error occurred between E-mail (SMTP) servers.
The SMTP server does not correspond to the form of the
specified encryption connection. Please confirm the form of the
encryption connection.
RL:xxx,ML:xxx
67
CA92344-0542-02