Replacing The S/Mime Certificate During The Initialization Work; Figure 3.18 [Automatic Registration State] Window; Figure 3.19 [Replacement Of Certificates] Window (During Initialization Work) - Fujitsu Primequest 2000 Series Installation Manual

CHAPTER 3 REMCS Service Start Procedure

3.4 Replacing the S/MIME certificate during the initialization work

6. Click the [OK] button.
After the registration is completed, the window shown in
3.4 Replacing the S/MIME certificate during the initialization
work
This section describes the procedure for replacing the certificate.
1. Click [Replacement of certificates] from
[Replacement of certificates] window (during initialization

FIGURE 3.19 [Replacement of certificates] window (during initialization work)

2. Specify the certificate file and then click the [Next] button.
window (during initialization

FIGURE 3.18 [Automatic registration state] window

FIGURE 3.4 [Initial Settings] window
work).
22
FIGURE 4.1 [REMCS initial] window
to display
work).
FIGURE 3.20 [Confirmation of certificate]
appears.
FIGURE 3.19
CA92344-0542-02