Advertisement
PRIMERGY ECONEL 100 S2
Configuration Diagram
Power Supply Unit
Memory
DIMM Slot 2B
DIMM Slot 1B
DIMM Slot 2A
DIMM Slot 1A
CPU
Xeon®
E3120 / E3110 /
TM
Core
2 Duo
E7300 /
Pentium®
E2200 /
Celeron®
430
PCI Slots
PCI4 PCI Express (x1)
PCI3 PCI Express (x8)
PCI2 PCI Express (x4)
PCI1 PCI 32bit/33MHz
*Components installed as standard configuration marked in grey.
Mountable I/O Options
[ 3.5inch SATA model ]
Mount Priority
Mountable Cards
SAS RAID Ctrl w/ Cable
High
( 8ports / 256MB / without BBU )
Eth. Ctrl 1x1Gbit PCI
1000-BASE-T
Eth. Ctrl 1x1Gbit PCI-E
1000-BASE-T
Low
Parallel Port
* [n] : Installation Priority
* -
: cannot be installed
Notes on SATA HDD
1. ECONEL 100 S2 (3.5inch SATA model) can be used on a small scale without frequent data access about eight hours a day, for five years.
2. If you would like to use server 24 hours a day, every day, or for database with frequent data access, or for mission-critical tasks which require high reliability,
please purchase another SAS model.
3. Please backup data on a regular basis to prevent loss of data.
4. Dump function of Linux is not available for ECONEL 100 S2 (3.5inch SATA model). If you would like to use dump function of Linux, please purchase another SAS model.
Connection Table
*CPU Conversion kit (available only as a Configure To Order (CTO) option; no separate shipment is possible)
Type
Product ID
CPU Conversion kit:
Pentium E2200(2.20GHz)
PGBFU50L
-> Xeon E3120(3.16GHz)
(for CTO)
CPU Conversion kit:
Pentium E2200(2.20GHz)
PGBFU50K
-> Xeon E3110(3GHz)
(for CTO)
CPU Conversion kit:
Pentium E2200(2.20GHz)
PGBUFU50P
-> Core 2 Duo E7300(2.66GHz)
(for CTO)
5 inch Bay 2
DVD-ROM Drive
5 inch Bay 1
3.5 inch FDD
3.5 inch HDD Bay 4
3.5 inch HDD Bay 3
3.5 inch HDD Bay 2
3.5 inch HDD Bay 1
1
PCI
Bus
32bit/
33MHz
3.3V
PG-248BC
PCI Express (x4)
-
PG-1853
PCI/32bit
[1]
PG-285
PCI Express (x1)
-
PG-PP08
-
-
Intel® Pentium® E2200(2.20GHz/1MB) -> Intel® Xeon® E3120(3.16GHz/6MB)
Convert the CPU installed as standard in the base unit to the other.
(Note: This option can be ordered only as coupled with the base unit.
A separate shipment is not possible.)
Intel® Pentium® E2200(2.20GHz/1MB) -> Intel® Xeon® E3110(3GHz/6MB)
Convert the CPU installed as standard in the base unit to the other.
(Note: This option can be ordered only as coupled with the base unit.
A separate shipment is not possible.)
Intel® Pentium® E2200(2.20GHz/1MB) -> Intel® Core
Convert the CPU installed as standard in the base unit to the other.
(Note: This option can be ordered only as coupled with the base unit.
A separate shipment is not possible.)
< 3.5inch SATA model >
Hard Disk 3.5inch Bay
Standard Drive Cage( HDD x 4ports )
Bay 1
SATA
Bay 2
SATA
Bay 3
SATA
Bay 4
SATA
PCI Slot
2
3
4
PCI Express
Max No.of Mount
x4
x8
x1
lane
lane
lane
Full Height
x8 socket
-
[1]
-
1
-
-
-
1
[1]
-
-
1
-
-
[1]
1
Remarks
TM
2 Duo E7300(2.66GHz/3MB)
Remarks
Internal array
No AFT/ALB Support
No AFT/ALB Support
Advertisement
