Table 6.32 Messages In The [Replacement Of Certificates] Window; Table 6.33 Messages In The [Confirmation Of Certificate] Window - Fujitsu Primequest 2000 Series Installation Manual

CHAPTER 6 REMCS Messages
6.1 Messages in REMCS Windows
RMG_0196
RMG_0209
RMG_0210
Message code
RMG_0002
RMG_0004
RMG_0033
RMG_0036
RMG_0142
RMG_0211
RMG_0212
RMG_0213
RMG_0214
RMG_0215
RMG_0224
Message code
RMG_0001
RMG_0002
RMG_0004
RMG_0041
RMG_0216
RMG_0217
RMG_0218
RMG_0219
Failed to delete personal information.(xxx)
Deleting the personal information is
completed.
Personal information deletion frame display
has been completed.

TABLE 6.32 Messages in the [Replacement of certificates] window

Failed to make frame screen data. (xxx)
Invalid CGI parameter specified.
Invalid directory name specified.
Required entry.
The file doesn't exist in the selected directory.
The specified file cannot be upload.
Failed to upload the certificates.(xxx)
Upload of the certificates has been
completed.
The frame display of the permutation of the
certificates completed.
This certificate cannot be verified up to a CA
certificate.
This certificate is the same as the one used
now. The certificate need not be imported.

TABLE 6.33 Messages in the [Confirmation of certificate] window

Failed to get Machine status.(xxx)
Failed to make frame screen data. (xxx)
Invalid CGI parameter specified.
Failed to setting Machine status.(xxx)
The certificates will be replaced. Once the
replacement of certificates proceeds, the
report to the REMCS center will not be done
until connected confirmation is completed.
Are you sure?
The frame display of confirmation of the
certificate has been completed.
Failed to replace the certificate. Try to replace
the certificate again. (xxx)
Replacing the certificate has been completed.
Message
Message
64
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
None.
Action
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
Enter a valid directory.
Enter data for the item.
Check the entered directory
name and file name, and
enter them correctly.
Enter a valid file name.
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
None.
Confirm that the specified
certificate is valid.
Confirm the file to be
imported.
Action
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
Click the [OK] or [Cancel]
button.
None.
Replace the certificate
again. If the problem is not
solved, contact the support
center.
None.
CA92344-0542-02