Chapter 3 Remcs Service Start Procedure; Start Procedure Overview; Figure 3.1 Remcs Center Registration Flow - Fujitsu Primequest 2000 Series Installation Manual

CHAPTER 3 REMCS Service Start Procedure

3.1 Start Procedure Overview

CHAPTER 3
This chapter describes the procedure for starting the REMCS service.
3.1 Start Procedure Overview
To start the REMCS service, the user must register with the REMCS Center (registration).
Registration means to register customer information with the REMCS Center.
This procedure can be omitted if a field engineer has already completed the registration procedure on behalf
of the customer, using the information obtained directly from the customer during product installation.

FIGURE 3.1 REMCS Center registration flow

REMCS Service Start
Procedure
shows the screen transitions during the initialization work.
6
CA92344-0542-02