Table 6.10 Messages In The [Customer Information Review] Window; Table 6.11 Messages In The [Automatic Registration State] Window; Table 6.12 Messages In The [Internet (Mail Only) Connection Environment Settings] Window - Fujitsu Primequest 2000 Series Installation Manual

CHAPTER 6 REMCS Messages
6.1 Messages in REMCS Windows
RMG_0210
Message code
RMG_0002
RMG_0004
RMG_0150
RMG_0215
Message code
RMG_0002
RMG_0004
RMG_0038
RMG_0039
RMG_0040

TABLE 6.12 Messages in the [Internet (Mail Only) connection environment settings] window

Message code
RMG_0001
RMG_0002
RMG_0004
RMG_0006
RMG_0015
RMG_0016
RMG_0018
RMG_0030
RMG_0031
RMG_0036
RMG_0037
RMG_0041
Personal information deletion frame display
has been completed.

TABLE 6.10 Messages in the [Customer Information Review] window

Failed to make frame screen data. (xxx)
Invalid CGI parameter specified.
Failed to read setting file.(xxx)
This certificate cannot be verified up to a CA
certificate.

TABLE 6.11 Messages in the [Automatic registration state] window

Failed to make frame screen data. (xxx)
Invalid CGI parameter specified.
Automatic registration started.
Automatic registration completed.
Automatic registration failed. (xxx:xxx)
Failed to get Machine status. (xxx)
Failed to make frame screen data.(xxx)
Invalid CGI parameter specified
Failed to get connect mode. (xxx)
Invalid entry.
Input value is out of range.
Failed to get registration data (xxx)
Specify [UserID]/[Password]/[POP Server] all
when you specify POP server.
Specify [UserID]/[Password] all when you
specify AUTH SMTP.
Required entry.
Execute registration of REMCS environment
data.
Are you sure?
Failed to setting Machine status.(xxx)
Message
Message
Message
55
problem is not solved,
contact the support center.
None.
Action
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
None.
Action
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
None.
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
Action
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
Correct the entered value.
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
Correct the specified POP
server information.
Correct the specified AUTH
SMTP information.
Enter a valid value.
Click the [OK] or [Cancel]
button.
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
CA92344-0542-02