Table 6.14 Messages In The [Periodical Connection Settings] Window - Fujitsu PRIMEQUEST 1000 Series Installation Manual

PRIMEQUEST 1000 Series REMCS Installation Manual
CHAPTER 6 REMCS Messages
Message code
RMG_0207
Invalid value in [Split size].Please specify it within the
range of 10-100.
RMG_0208 Invalid value in [Split size].Please specify it within the
range of 64-512.

TABLE 6.14 Messages in the [Periodical Connection settings] window

Message code
RMG_0001 Failed to get Machine status. (xxx)
RMG_0002 Failed to make frame screen data. (xxx)
RMG_0004 Invalid CGI parameter specified.
RMG_0006 Failed to get connect mode. (xxx)
RMG_0015 Invalid entry.
RMG_0016 Input value is out of range.
RMG_0018 Failed to get registration data.(xxx)
RMG_0027 Failed to change Machine status. (xxx)
RMG_0036 Required entry.
RMG_0048 Invalid end time.
RMG_0049 Execute registration of periodical connection
schedule. Are you sure?
RMG_0050 Periodical Connection setting frame display
completed.
RMG_0051 Failed to register the periodical connection schedule.
(xxx)
RMG_0052 Failed to set the periodical connection schedule. (xxx) If the error still occurs when you
RMG_0054 Registration of the periodical connection schedule
completed.
Message
Message
66
Action
Enter a valid value.
Action
If the error still occurs when you
retry the operation, exit and
restart the REMCS window and
try again. If the problem is not
solved, contact the support
center.
Correct the entered value.
If the error still occurs when you
retry the operation, exit and
restart the REMCS window and
try again. If the problem is not
solved, contact the support
center.
Enter a valid value.
Confirm the start time and set a
valid end time.
Click the [OK] or [Cancel]
button.
None.
Check whether the network
status is normal.
retry the operation, exit and
restart the REMCS window and
try again. If the problem is not
solved, contact the support
center.
None.
C122-E120-06EN