221: Bar Code Scanner Problem; 222: Firmware Version Mismatch; 223: Laminator System Mismatch - DataCard SD Series User Manual

221: Bar code scanner problem

1.
Open the laminator and remove the L1 cartridge.
2.
Verify the supply has bar codes printed on it.
3.
Replace the cartridge and close the laminator.
4.
Try the card again.
5.
If the problem occurs again, request service.

222: Firmware version mismatch

The printer and laminator firmware versions are not compatible. The system
cannot laminate cards until the firmware has been updated.
Update both the printer and laminator to the latest firmware versions.

223: Laminator system mismatch

The printer and laminator are not compatible.
The laminator is not supported by your printer model. Contact your service
provider for the correct laminator model.
SD Series Card Printers User's Guide 75