DataCard SD Series User Manual page 41

5.
Replace the print ribbon cartridge. Avoid
bumping the printhead when you install the print
ribbon cartridge.
6.
Close the printer cover. Press down on the ridges
on the front of the cover to make sure that it
latches properly on both sides.
7.
Power on the printer.
8.
Print a sample card to verify the quality of
printing. Refer to "Print a Test Card" on page 18
for more information.
H & T
INTS
Avoid touching the printhead edge with your fingers. Contamination due to
•
skin oils eventually can damage the printhead.
Avoid touching the printing edge of the printhead cartridge with any sharp
•
objects that can permanently damage the printhead.
Use only the cleaning swab to clean the printhead. Other materials can stick
•
to the printhead and cause damage.
Use a cleaning swab one time only. Discard it after you clean the printhead.
•
SD Series Card Printers User's Guide
IPS
29