202: L1 Supply Out Or Missing; 203: L1 Supply Type Problem; 204: L1 Supply Not Supported; 205: L1 Supply Not Identified - DataCard SD Series User Manual

Card printers
Hide thumbs Also See for SD Series:
Table of Contents

Advertisement

202: L1 supply out or missing

The laminator does not have usable supplies. 
1.
Open the laminator.
2.
Replace the supply.
3.
Close the laminator.

203: L1 supply type problem

The laminator cannot use the supply installed.
Use supplies designed for this laminator.

204: L1 supply not supported

The laminator cannot use the supply installed.
Use supplies designed for this laminator.

205: L1 supply not identified

The laminator cannot use the supply installed.
Use supplies designed for this laminator.

206: L2 supply problem

The L2 supply is not moving properly. To try another card:
1.
Open the laminator and remove the L2 cartridge. 
2.
Reposition, repair, or replace the supply and advance the repaired area one 
full turn.
3.
Replace the cartridge and close the laminator.

207: L2 supply out or missing

The laminator does not have usable supplies. 
1.
Open the laminator.
2.
Replace the supply.
3.
Close the laminator.
72
Troubleshooting

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents