Print A Test Card - DataCard SD Series User Manual

7.
Press E
Gateway Address
8.
Press E
if necessary.
9.
Press E
10.
Press the down arrow key to scroll to
11.
Press E
U
SER

Print a Test Card

The printer includes a test card that runs without using a driver or other source of
card data. Use it to verify that the printer is working.
1.
Begin with the printer
steady green.
2.
Press the U
of the LCD panel.
3.
Press E
4.
Press E
5.
Press the down arrow until
line 2.
6.
With
display
7.
Press E
After the card prints, the printer returns to
18
to return to the Network Status menu.
NTER
displays on line 2.
to display the gateway address. Record it,
NTER
to return to the Network menu.
NTER
. Then, press the U
NTER
button glows green.
Ready
button to display
SER
to enter the menu system.
NTER
to enter the Maintenance menu.
NTER
Test Card
displayed on line 2, press E
Start
on line 2.
to print the test card.
NTER
Exit
on line 2.
button to return the printer to
SER
. The U button shows
SER
Suspended
on line 1
Test Card
displays on
to
NTER
Ready
Ready
.
Using the System
. The