149: Option Not Installed; 152: Insert New Card Side 2 Up; 153: Insert Same Card Side 2 Up; 170: Insert New Card Side 1 Up - DataCard SD Series User Manual

149: Option not installed

The printer does not support the personalization being requested for the card.
The card will be canceled.
Change the card data to match the printer's options and settings, or print to a
printer that is configured to support the personalization being requested.
Press the U
message.
H & T
INTS
In the card format, don't include references to hardware that cannot be accessed
by the system. For more information, refer to your ID software documentation or
ask your system administrator.

152: Insert new card side 2 up

1.
Turn a new card over end to end so side 2 is facing up.
2.
Insert the card in the printer.
3.
If the card is not immediately picked, press the printer's U
click OK.
Click Cancel in the message box if you want to cancel the card.

153: Insert same card side 2 up

1.
Take the card from the printer and turn it over end to end so side 2 is facing
up.
2.
Insert the card in the printer.
3.
If the card is not immediately picked, press the printer's U
click OK.
Click Cancel in the message box if you want to cancel the card.

170: Insert new card side 1 up

1.
Insert a new card in the printer with side 1 facing up.
2.
If the card is not immediately picked, press the printer's U
click OK.
Click Cancel in the message box if you want to cancel the card.
SD Series Card Printers User's Guide
button on the printer, or click OK in the message box to clear the
SER
IPS
button or
SER
button or
SER
button or
SER
69