111: Card Not Picked; 112: Card Hopper Empty; 113: Close Cover To Continue; 114: Cover Opened During Job - DataCard SD Series User Manual

111: Card not picked

The printer did not pick a card. To complete the current card:
For printers with an input hopper, open the input hopper, add or reposition cards,
and close the hopper.
For printers with single card feed, push the card in until the printer picks it.
Press the U
to cancel the card.

112: Card hopper empty

The printer did not detect cards in the input hopper.
Add cards to the input hopper.
Press the U
to cancel the card.

113: Close cover to continue

The printer cover must be closed to print.
Push down on the cover to latch it.
Press the U
to cancel the card.
H & T
INTS
Make sure that the ribbon cartridge is installed properly with the cartridge handle
even with the edges of the printer.

114: Cover opened during job

The printer cover was opened while printing.
Push down on the cover to latch it.
Press the U
Cancel to cancel the card.
H & T
INTS
Make sure that the ribbon cartridge is installed properly with the handle even
with the edges of the printer.
SD Series Card Printers User's Guide
button on the printer. In the message box, click OK, or click Cancel
SER
button on the printer. In the message box, click OK, or click Cancel
SER
button on the printer. In the message box, click OK, or click Cancel
SER
IPS
button on the printer. In the message box, click Retry, or click
SER
IPS
65