116: Magstripe Not Available; 117: Reader Not Available - DataCard SD Series User Manual

116: Magstripe not available

The printer does not have a magnetic stripe option. The card will be canceled.
Remove magnetic stripe data from the card or use a printer that has a magnetic
stripe option installed.
Press the U
message.
H & T
INTS
To remove magnetic stripe data, you or your system administrator may need to:
Clear a check box in the card production application.
•
Change the font from Mag Track x XPS Card Printer to a printable font such as
•
Arial, Verdana, or Calibri. Refer to "Magnetic Stripe Fonts" in your printer's
Driver Guide.

117: Reader not available

The printer does not support the personalization being requested for the card.
The card will be canceled.
Change the card data to match the printer's options and settings or print to a
printer that is configured to support the personalization being requested.
Press the U
message.
H & T
INTS
To remove the reader request, you or your system administrator may need to
clear a check box in the card production application.
66
button on the printer, or click OK in the message box to clear the
SER
IPS
button on the printer, or click OK in the message box to clear the
SER
IPS
Troubleshooting