Run a Printer Cleaning Card
Run a cleaning card to clean debris from the inside of the printer and from the
hopper rollers. The cleaning card can remove most contaminants from the
printer. Run a cleaning card after every 250 cards processed by the printer, or
every 6 months.
1.
Prepare the printer for cleaning.
A.
B.
C.
D.
E.
F.
30
Power on the printer.
Open the printer cover and remove the print
ribbon cartridge.
Close the cover.
Open the input hopper and remove any
unprinted cards.
Open the cleaning card package and
remove the cleaning card.
Load the cleaning card in the input
hopper. (Plan to clean the printer
immediately. The cleaning card dries out if
it is out of its package for more than a few
minutes.)
If you have a manual feed printer, wait
until you are prompted to insert the
cleaning card.
System Maintenance