103: Printer problem
The printer had an error. The card will be canceled.
1.
Press the printer P
2.
Press the P
Click OK in the message box to clear the message.
104: Critical problem
The printer had a serious error. The card will be canceled.
1.
Press the printer P
2.
Request service.
The system must remain powered off.
Click OK in the message box to clear the message.
105: Magstripe data error
The printer failed to verify that the correct magnetic stripe data was written on
the card.
1.
Make sure that you are using magnetic stripe cards that match the printer
settings.
2.
Make sure that the cards are placed in the printer correctly.
Press the U
Cancel to cancel the card.
H
& T
INTS
The card might have been turned the wrong way.
•
The card might not have a magnetic stripe.
•
62
button to power off the printer.
OWER
button again to power on the printer.
OWER
button to power off the printer.
OWER
button on the printer. In the message box, click Retry, or click
SER
IPS
Troubleshooting