The Printing Is Too Light - DataCard SD Series User Manual

The printing is too light

Problem
Photos look faded.
The printing is very light.
46
Probable Cause
The image capture
system needs
adjustment.
The ribbon is loaded
incorrectly.
The card was
previously printed and
has topcoat on it.
The printhead is not
installed correctly.
The printhead power is
too low.
Solution
Color settings might not be optimal.
Adjust color settings. Refer to the
documentation for the image capture
system, "Color Printing" in your printer's
Installation and Administrator's Guide,
and "Color Adjustment Tab" in your
printer's Driver Guide.
Load the print ribbon correctly. Refer to
"Load the Print Ribbon"
Print only new cards. Refer to "Cards" in
your printer's Installation and
Administrator's Guide.
Contact your service provider for
instructions to install the printhead
correctly.
Log on to the Printer Manager as a
WebAdmin. Open the Printer Settings >
Print menu. Increase the YMCPower
setting, and press the Set Current button
to save your changes.
on page 20.
Troubleshooting