Traffic Management - NEC Univerge SV8500 Operation And Maintenance Manual

9. TRAFFIC MANAGEMENT

To obtain the value of common equipment usage, the system provides traffic measurement feature. It can
improve the system efficiency.
9.1 Kind of Traffic Measurement
9.1.1 Description of Traffic Measurement
The kinds of traffic measurements are shown below.
KIND OF
TYPE
MEASUREMENT
1 Terminal Traffic
Note 1 Measurement
2 Route Traffic
Measurement
Note 1
3 Station Peg Count
Note 1
Note 6
4 ATTCON Peg Count
Note 1
Note 6
Note 6
5 Route Peg Count
Note 1
6
Service Peg Count
Note 6
8 UCD Route Peg Count
9 UCD Group Peg
Count
10 UCD Station Peg
Count
15 ATT Answer Peg
Note 3
Count
Note 6
18 Connection Route Peg
Count
19 Connection Route
Traffic
20 IP Service Peg Count
21 IP Service Traffic
Measurement
Table 2-1 Traffic Measurement Types
Measurement of traffic on a per LENS basis, and measurement of the total
traffic on a PIR basis.
Note 2
Measurement of traffic on a per route basis.
Measurement of the number of outgoing connections, intra-office calls,
outgoing C.O. line calls, TIE line calls, etc. originated by each station.
Measurement of the number of each type of call handled at the ATTCON/
DESKCON.
Measurement of the number of various types of call connections on a per
route basis.
Measurement of the number of times the following services are operated:
Call Hold
Call Back
Executive Right of Way
Call Waiting
Call Pickup - Group
Call Pickup - Direct
Call Forwarding - All Calls
Call Forwarding - Busy Line
Call Forwarding - Don't Answer
Measurement of the number of incoming calls, answered calls, and
abandoned calls handled at UCD Groups on a per route basis.
Measurement of the number of incoming calls, answered calls and
abandoned calls on a UCD Group basis.
Measurement of the number of incoming calls, answered calls and
abandoned calls for each station on a UCD Group basis.
Measurement of the number of answered calls handled by each attendant.
Measurement of the number of various type of call connection on a
connection route basis.
Measurement of traffic on a connection route basis.
The total number of call origination/termination via FCCS Networking via
IP and CCIS Networking via IP, on a Node-to-Node basis.
Measurement of IP service-related traffic on a Node-to-Node basis (IP
service: FCCS Networking via IP, CCIS Networking via IP).
CHAPTER 2
DESCRIPTION
Speed Calling - System
Speed Calling - Station
Off-Hook Outgoing Trunk Queuing
Outgoing Trunk Queuing
Consultation Hold - All Call
Call Transfer - All Calls
Three-Way Calling
– 112 –
Operations of SV8500 Server
Note 3
Note 3