Changing Input Settings With A Single Key (Scene Function); Selecting The Scene Suitable For The External Component - Yamaha RX-A1000 Owner's Manual

Changing input settings with a single key (SCENE function)

This unit has a SCENE function that allows you switch this unit on and change input sources, the settings of Audio Select, HDMI Output, Sound Program, Pure Direct Mode, Tone Control, Adaptive
DRC, and Compressed Music Enhancer with one key.

Selecting the SCENE suitable for the external component

At initial factory settings, SCENE functions are configured for the following components. Select a
scene according to the component that you want to play back.
1 1
BD/DVD BD/DVD
SCENE 1
Settings are configured for viewing DVD or Blu-ray Disc content. Press this key and play back content
from the DVD or Blu-ray Disc player connected to the AV1 jack on this unit.
SCENE 2
The settings are configured for viewing a TV content. Press this key and turn on the TV connected to
the AUDIO1 jack on this unit.
Four scenes are available for different uses, such as playing movies or music. The following settings such as input sources, sound programs, and HDMI Output are provided at initial factory settings.
Settings that are not checked ( ) are not enabled when a scene key is pressed. Use "Load" in the Scene menu to check settings to be enabled. Refer to "Adjusting settings registered with the SCENE function"
(☞p. 81) for details.
Audio HDMI
Input
Select Output
SCENE
✓ ✓
1 AV1 Auto OUT 1+2
(BD/DVD
Movie Viewing)
2 AUDIO1 Auto OUT 1+2
(TV Viewing)
3 AUDIO2 Auto OUT 1+2
(CD Music
Listening)
4 TUNER --- OUT 1+2
(Radio
Listening)
SCENE
2 2 3 3 4 4
TV TV CD CD RADIO RADIO
Sound Pure Direct Adaptive
Tone Control
Program Mode DRC
✓
Drama Auto Bass: 0.0 dB On
Treble: 0.0 dB
STRAIGHT Auto Bass: 0.0 dB On
Treble: 0.0 dB
STRAIGHT Auto Bass: 0.0 dB Off
Treble: 0.0 dB
STRAIGHT Auto Bass: 0.0 dB Off
Treble: 0.0 dB
SCENE 3
The settings are configured for listening to CD content. Press this key and play back the CD player
connected to the AUDIO2 jack on this unit.
SCENE 4
Settings are configured for listening to a radio station. Press this key and tune into a radio station.
SCENE 5-12
The nothing is registered on the scenes at initial factory setting. The favorite settings can be registered on the
scenes and reloaded by using "Save" and "Load" in Scene menu. For details, refer to "Scene menu"
• When switching scenes, also change the external component that the remote control operates
(☞p. 106).
• We recommend that selecting a scene and editing the SCENE function are performed in the Scene menu
(☞p. 80).
• This unit has eight additional scene functions. After selecting one of these scenes, one of the additional
eight scenes may also be selected
i
• Press and hold SCENE
Compressed CINEMA
Dialogue
Music DSP 3D
Lift
Enhancer Mode
✓
Off On 0
On On 0
Off On 0
On On 0
PLAYBACK
(☞p. 81).
key for about three seconds to register the current setting to the scene.
Extended Video Master
Lipsync
Surround Processing Volume
Auto Off -40.0 dB Auto
Auto Off -40.0 dB Auto
Auto Off -40.0 dB Auto
Auto Off -40.0 dB Auto
(☞p. 81).
Setting PEQ
Delay
Pattern Select
0 ms Pattern1 Natural
0 ms Pattern1 Natural
0 ms Pattern1 Natural
0 ms Pattern1 Natural
46
En