Parameters Usable In Certain Sound Programs - Yamaha RX-A1000 Owner's Manual

Reverb Level
Reverberation level. Adjusts the volume of the reverberation
sound. The larger the value, the stronger the reverberation
becomes.
Adjustable range 0 to 100%
Source sound
Rev. Level
Decode Type
Selects a surround decoder to be used with a sound program in the
J1
MOVIE category.
PLIIx Movie Selects the Dolby Pro Logic IIx Movie (or
PLII Movie
Dolby Pro Logic II Movie) decoder.
Neo:6 Cinema Selects the Neo:6 (Cinema) decoder.
J
1 : Surround decoders cannot be changed when used with the following MOVIE
and ENTERTAINMENT sound programs.
• Mono Movie
• Sports
• Action Game
• Roleplaying Game
Parameters usable in certain sound
programs
2ch Stereo only
Direct
Automatically bypasses the DSP circuit and tone control circuit
depending on the condition of tone control etc., when an analog
audio source is played back. You can enjoy a higher quality sound.
Auto (Default)
Outputs sound by bypassing the DSP circuit and tone
control circuit when both tone controls of "Bass" and
"Treble" are set to 0 dB.
Off
Does not bypass the DSP circuit and tone control
circuit.
Time
7ch Stereo only
Center Level
Adjusts the center channel volume.
Adjustable range 0 to 100%
Default setting 100%
Surround L Level
Adjusts the volume of the surround L channel.
Adjustable range 0 to 100%
Default setting 100%
J
2 : Not displayed when speakers are set to be inactive.
Setting sound program parameters (Sound Program menu)
Surround R Level
Adjusts the volume of the surround R channel.
Adjustable range
Default setting
Surround Back L Level
Adjusts the volume of the surround back L channel.
Adjustable range
Default setting
Surround Back R Level
Adjusts the volume of the surround back R channel.
Adjustable range
J2
Default setting
Front Presence L Level
Adjusts the volume of the front presence L channel.
J2
Adjustable range
Default setting
SETUP
J2
0 to 100%
100%
J2
0 to 100%
35% (7.1-channel configuration)
50% (6.1-channel configuration)
J2
0 to 100%
35% (7.1-channel configuration)
50% (6.1-channel configuration)
J2
0 to 100%
33%
86
En