Adjust Settings For Each Input Source <Option Menu - Yamaha RX-A1000 Owner's Manual

■ Adjust acoustic parameters to match your speakers and listening environment
– Specify speaker acoustic parameters automatically
(Yamaha Parametric Room Acoustic Optimizer -
– Set up this unit's speaker configuration simply <Power Amp Assign>
– Specify settings for each speaker <Configuration>
– Control volume control for each speaker <Level>
– Apply speaker distance settings <Distance>
– Control equalizer sound quality <Parametric
– Adjust test tone speaker <Test Tone>
......................................................................................................93
■ Adjust audio signals output from this unit
– Correct lag between audio and video signals <Lipsync>
– Select a dynamic range adjustment method <Dynamic Range>
– Specify the maximum volume <Max Volume>
– Specify the initial volume <Initial Volume>............................................................................................94
– Restrict the video signals during the Pure Direct Mode <Pure Direct Mode>
– Adjust DSP effect and volume level <Adaptive DSP
■ Adjust video signals output from this unit
– Convert analog video signal to another type of signal <Analog to Analog Conversion>
– Specify the resolution and aspect ratio of output video signals
■ HDMI settings
– Assign the audio input source for the TV <TV Audio
– Listen to TV audio with HDMI cable connection <ARC (Audio Return
– Transmit HDMI audio/video to the TV during standby mode <Standby Through>
– Change the output destination of HDMI input audio signals <Audio
■ Network settings
– Set the IP address of this unit <IP Address>
– Accept the commands via LAN network when this unit is in the standby mode
<Network Standby> .................................................................................................................................98
– Set the mac address filter for this unit <MAC Address Filter>
■ Enable listening in multiple rooms (multi-zone function)
– Adjust Zone2 volume <Zone2
Set>.........................................................................................................99
– Display the Zone2 menu on the TV <Monitor Out Assign>
– Rename each zone or scene <Zone2 Scene Rename/Zone Rename>
YPAO).......................................................................37
..................................................90
.................................................................................90
..................................................................................92
...........................................................................................92
EQ>..................................................................................92
........................................................................93
.............................................................94
.......................................................................................94
........................................94
Level>..................................................................94
.......................95
<Processing>........................................95
Input>.................................................................97
Channel)>..............................96
...............................97
Output>.......................................97
...........................................................................................98
...............................................................98
...................................................................99
...................................................100
■ Specify other functions for this unit
– Enter standby mode automatically when no operations are performed <Auto Power Down>
– Assign the other input to the selected input source <Input Assignment>
– Adjust the brightness of the front panel display <Dimmer>
– Change the wall paper displayed on the TV screen <Wall
– Specify the function of the TRIGGER OUT jack for controlling external components
<Trigger Output1/Trigger Output2>......................................................................................................102
– Prohibit changes to settings <Memory Guard>
Adjust settings for each input source <Option menu>
– Adjust bass and treble levels <Tone Control>
– Enable low-volume background music <Adaptive DRC>
– Enjoying more spatial sound fields <CINEMA DSP 3D Mode>
– Adjust the vertical position of dialogues <Dialogue Lift>
– Select the 5.1-channel signal playback method <Extended Surround>
– Adjust the volume of input sources <Volume
– Selecting audio input jacks <Audio Select>
– Shuffle or repeat the song
<Shuffle/Repeat>...........................................................................................57
– Connect / Disconnect Bluetooth component to this unit <Connect/Disconnect>
– Pairing Bluetooth component with this unit <Pairing>
INTRODUCTION
Using the TV OSD to operate the unit
.............................................101
.................................................................102
Paper>........................................................102
.....................................................................................103
.........................................................................................56
......................................................................56
............................................................56
......................................................................56
..................................................56
Trim>...............................................................................57
............................................................................................57
...................................57
...........................................................................57
.............101
7
En