Controlling Zone2; Enjoying The Music In All Rooms - Yamaha RX-A1000 Owner's Manual

MAIN ZONE 2
b
CODE SET

Controlling Zone2

SOURCE RECEIVER
q
AV
1 2 3 4
The remote control can be used to select and control
5 6 7 V-AUX
Zone2 devices. The available operations are as follows:
AUDIO
d
• Selecting the input source of Zone2.
1 2 3 4
• Tuning into FM or AM when "TUNER" is selected as the
USB NET MULTI DOCK
HDMI OUT
input source of Zone2.
TUNER PHONO
• Adjust the volume of Zone2 devices (when connected via
FM AM
the built-in amplifier).
PRESET TUNING
INFO MEMORY
■
Activating the Zone2 operation
ENHANCER SUR. DECODE
g
MOVIE MUSIC
mode
SLEEP PARTY STRAIGHT PURE DIRECT
h
bMAIN/ZONE2
Set
SCENE
i
1 1 2 2 3 3 4 4
use the remote control to control Zone2 devices.
BD/DVD BD/DVD TV TV CD CD RADIO RADIO
■
Operating Zone2
ON SCREEN OPTION
ENTER VOLUME To enable and disable the audio output to Zone2
qRECEIVER
RETURN DISPLAY Press
TOP
POP-UP
MUTE To select an input source for Zone2
MENU MENU
dInput
Press
REC
Only the following sources are available for
1 2 3 4
the Zone2.
5 6 7 8
AV1-4 (only analog audio input), V-AUX (only
9 0 10 ENT
analog audio input), AUDIO1-4 (only analog audio
input), PHONO, USB, NET, DOCK, TUNER
INPUT
MUTE
To use SCENE function for Zone2
Press and hold
register the current setting to the scene.
b
iSCENE
Press
MAIN/ZONE2
d
Input selector
The following settings can be registered for
g
SLEEP
each scene of the Zone2.
h
PARTY
i Input, Master Volume, Tone Control
SCENE
q
RECEIVER A
to ZONE2 before attempting to
A.
selector.
iSCENE
key for about 3 seconds to
key to load the registered setting.
To enable the sleep timer for Zone2
Automatically switch the Zone2 device to standby mode
after a specified period of time has elapsed (sleep timer).
gSLEEP
Press repeatedly to specify a time for the
sleep timer function.
120min. 90min.
Off 30min. 60min.
■
Adjusting Zone2 high-/low-
frequency sound (Tone Control)
1 Press ZONE CONTROLS on the front panel.
Press TONE/BALANCE on the front panel
2
repeatedly to select "Treble" or "Bass."
Press PROGRAM l / h to adjust the output
3
level in the applicable frequency range.
Adjustable range -10.0 dB to +10.0 dB
Adjustment 2.0 dB
increments
The display returns to the previous display soon after the
key is released.
■
Adjusting Zone2 front speaker
balance
1 Press ZONE CONTROLS on the front panel.
2 Press TONE/BALANCE on the front panel
repeatedly to select "Balance."
Press PROGRAM l / h to adjust balance.
3
The display returns to the previous display soon after
the key is released.
SETUP
Enjoying the contents in another room

Enjoying the music in all rooms

Use this feature to play main zone sources in Zone2
simultaneously. This feature is useful when you want to
play back main sources as background music in a home
party, etc. When using the party mode, set "Party Mode
Set" to "Enable" (☞p. 99).
hPARTY
Press to turn on or off the party mode.
"Party Mode On" or "Party Mode Off" appears on the
front panel display or the TV screen.
While this unit is in the party mode, the PARTY
indicators turn on in the front panel display.
• Input audio signals are mixed down to 2ch Stereo and
output at the analog ZONE2 OUT jacks.
• Party mode can be turned on only when the power of
main zone is turned on.
• Party mode automatically turns off when the power of
main zone is turned off.
En
119