Yamaha RX-A1000 Owner's Manual page 41

MAIN ZONE 2
CODE SET
■
Reviewing automatic setup
SOURCE RECEIVER
parameters
AV
1 2 3 4
The results of automatic acoustics measurement can be
5 6 7 V-AUX reviewed once measurement is complete.
AUDIO
1 2 3 4
kCursor B / C
1 Press
USB NET MULTI DOCK
HDMI OUT "Result" and press
TUNER PHONO
after the automatic measurement.
FM AM
PRESET TUNING
The Result menu can be viewed only by performing
INFO MEMORY
the automatic measurement.
ENHANCER SUR. DECODE
MOVIE MUSIC
SLEEP PARTY STRAIGHT PURE DIRECT
The results of acoustics measurement are displayed.
SCENE
1 1 2 2 3 3 4 4
BD/DVD BD/DVD TV TV CD CD RADIO RADIO
ON SCREEN OPTION
k
a
ENTER VOLUME
DISPLAY
TOP
POP-UP
MUTE
MENU MENU
REC
a
List of menu items
1 2 3 4
Menu items available in the Result menu are displayed.
5 6 7 8
b
Number of measurement
9 0 10 ENT Indicates the number of measurements for multiple
listening positions.
INPUT
c
Diagram
MUTE
Shows the speaker setup and sound adjustment as
diagram.
k
Cursor B / C / D / E
k
ENTER
k
RETURN
J
1 : This item is displayed after the fine-adjustment is performed with
"Manual Setup." Use this item to return the settings to the result
of automatic setup.
2 Select the desired menu item (or enable a
function) using
kENTER.
Wiring
repeatedly to select
kENTER immediately
Size
c
b
Distance
Level
Setup Reload
Setting up the speaker parameters automatically (YPAO)
kCursor B / C / D / E
and
Displays the speakers connected to this
unit and the polarity of each connected
speaker.
• "Normal" is displayed when the
polarity of the connected speaker is
normal.
• "Reverse" is displayed when the
polarity of the connected speaker is
opposite.
Displays the size of the connected
speakers.
• "Large" is displayed when the
connected speaker has the ability to
reproduce the low-frequency signals
effectively.
• "Small" is displayed when the
connected speaker does not have the
ability to reproduce the low-frequency
signals effectively.
Displays the distance from the listening
position to speakers. The unit for distance
can be switched between "ft" (feet) and
k
Cursor D / E.
"m" (meter) by pressing
Displays the result of the adjustment of
each connected speaker output level.
J1
Clears the fine-adjustment with Manual
Setup and reloads the result of automatic
setup. For details, refer to "Reloading
automatic setup parameters."
CONNECTIONS
kRETURN
3 Press to finish the Result menu.
The result of automatic setup can be fine-tuned
manually by "Manual Setup." Refer to "Manual
speaker setup" (☞p. 89) for details.
■
Reloading automatic setup
parameters
If you are not satisfied with the fine-adjustment of setup
parameters with Manual Setup, the result of automatic
setup saved on this unit can be reloaded. Select "Setup
Reload" in the Result menu.
NOTE
When automatic setup parameters are reloaded,
manually configured settings are cleared. To avoid
clearing manually configured settings by reloading
automatic setup parameters, see "Prohibiting setting
changes" (☞p. 103).
En
41