Yamaha RX-A1000 Owner's Manual page 17

■
Adding the presence speakers for a richer sound field effect
■ Presence speaker layout (7 speakers + subwoofer + presence speakers)
Front R speaker
Front L speaker
Presence L speaker
Center speaker
Surround L speaker
Surround back L speaker
This unit automatically selects the presence speakers or surround back speakers to output sounds
according to the selected sound program.
When the sound program is changed, the speakers that output the sound are switched between the
presence speakers and surround back speakers automatically.
■ Connections of speakers
FRONT jacks Front L/R speakers
CENTER jack Center speaker
SURROUND jacks Surround L/R speakers
■ Assigning a speaker configuration
Power Amp Assign 7ch Normal (Default)
J
1 : The sound of surround back channel can also be output from a single surround back speaker. When only one surround back
speaker is used, connect it to the SURROUND BACK L (SINGLE) jack and place it directly behind the listening position.
J
2 :
Sound cannot be output from the surround back speakers when it is output from the speakers connected to the EXTRA SP
jacks.
Presence R speaker
Subwoofer
Surround R speaker
Surround back R speaker
30 cm or more
J1
J2
SURROUND BACK jacks Surround back L/R speakers
SUBWOOFER Subwoofer
(PRE OUT) jack
EXTRA SP jacks Presence L/R speakers
■
Enjoying the audio source without surround back speakers
■ 5.1-channel speaker layout (5 speakers + subwoofer)
Front R speaker
Front L speaker
Center speaker
Surround L speaker
This unit can mix 7.1-channel audio source down to 5.1-channel sound. This enables 7.1-channel
sound without surround back speakers.
■ Connections of speakers
FRONT jacks Front L/R speakers
CENTER jack Center speaker
■ Assigning a speaker configuration
Power Amp Assign 7ch Normal (Default)
CONNECTIONS
Connecting speakers
Subwoofer
Surround R speaker
SURROUND jacks Surround L/R speakers
SUBWOOFER Subwoofer
(PRE OUT) jack
17
En