Changing Input Settings With A Single Key (Scene Function); Registering Input Sources/Sound Program/Hdmi Out; Enjoying The Desired Sound Field Effect; Selecting Sound Programs And Sound Decoders - Yamaha RX-A800 Owner's Manual

Changing input settings with a single key (SCENE function)

MAIN ZONE 2
CODE SET
RECEIVER
SOURCE
This unit has a SCENE function that allows you switch this unit on and change input sources, sound programs, and HDMI OUT with one key.
HDMI
1 2 3 4
AUDIO
Four scenes are available for different uses, such as
5 V-AUX 1 2
AV
playing movies or music. The following input sources,
d
1 2 3 4
sound programs, and HDMI OUT are provided as the
5 6 MULTI DOCK
initial factory settings.
HDMI OUT
TUNER SIRIUS [ A ]
CATEGORY
FM AM
PRESET TUN./CH
INFO MEMORY
SCENE Input
ENHANCER SUR. DECODE
MOVIE MUSIC
s
SLEEP PARTY STRAIGHT PURE DIRECT
BD/ HDMI1
SCENE
i
DVD
BD
TV CD RADIO
DVD
OPTION
ON SCREEN
TV AV4
ENTER VOLUME
CD AV3
RETURN
DISPLAY
TOP
POP-UP
MUTE
MENU MENU RADIO TUNER
REC
1 2 3 4
5 6 7 8

Enjoying the desired sound field effect

9 0 10 ENT
INPUT
This unit is also equipped with a Yamaha digital sound field processing (DSP) chip. Multi-channel playback from almost any audio source can be enjoyed using a variety
MUTE
of sound decoders and various sound field effect programs stored on the chip. Sound field effect programs built into this unit are called "sound programs."
Selecting sound programs and
sound decoders
d
Input selector
i
SCENE
s
Sound selection keys
This unit offers sound programs in many different
categories suitable for movies, music and other uses.
Choose a sound program that sounds best with the
source you are playing back, rather than relying on the
name or explanation of the program.
Registering input sources/sound
program/HDMI OUT
1
Compressed
Sound Music HDMI
program Enhancer OUT
mode
2
Drama Off HDMI
OUT 1+2
STRAIGHT On HDMI
OUT 1+2
STRAIGHT Off HDMI
OUT 1+2
STRAIGHT On HDMI
OUT 1+2
• Sound programs are stored for each input source.
• When you playback DTS Express sources or audio
• When you playback DTS-HD sources with CINEMA
dInput selector
Use to select the input
source you want to register.
Use the sSound selection keys to select
the sound program, Compressed Music
Enhancer mode, or HDMI OUT you want to
register.
When you change the input source, the sound program
previously selected for that input source is applied
again.
signals with sampling frequency of higher than
96 kHz, the straight decoding mode (☞p. 44) is
automatically selected.
DSP, the DTS decoder is automatically selected.
PLAYBACK
iSCENE
Press the key until "SET
3
Complete" appears on the front panel
display.
SCENE1
SET Complete
Release the key when "SET Complete" is displayed
• When changing "SCENE," also change the external
component that the remote control operates
• Selecting a scene and editing the scene function are
also available in the SCENE menu (☞p. 82).
Continues to the
En
VOL.
SW
C
R
L
SL SR
SBL SBR
(☞p. 105).
next page
43