Yamaha RX-A1000 Owner's Manual page 42

MAIN ZONE 2
CODE SET
■
When an error message is
SOURCE RECEIVER
displayed during measurement
AV
1 2 3 4
See "Error messages"
5 6 7 V-AUX resolving the problem and measure acoustics again.
AUDIO
1 2 3 4
USB NET MULTI DOCK
HDMI OUT
TUNER PHONO
FM AM
PRESET TUNING
INFO MEMORY
ENHANCER SUR. DECODE
MOVIE MUSIC
SLEEP PARTY STRAIGHT PURE DIRECT
SCENE
Check the error code displayed and use YPAO to
1 1 2 2 3 3 4 4
measure acoustics again as described below.
BD/DVD BD/DVD TV TV CD CD RADIO RADIO
ON SCREEN OPTION
When "E-1," "E-2," "E-3," "E-4" or "E-6" is
k
ENTER VOLUME
displayed:
RETURN DISPLAY
Press kENTER.
1
TOP
POP-UP
MUTE
MENU MENU
REC
kCursor E
2 Press
1 2 3 4
5 6 7 8
kENTER
3 Press
9 0 10 ENT
switch the unit to standby mode.
INPUT
MUTE
Check that the speakers are properly
4
connected.
5 Turn on the unit and use YPAO again.
k
Cursor B / C / D / E
k
ENTER
When "E-7" or "E-8" is displayed:
Press kENTER.
1
2 Check that the environment is suitable for
accurate measurement.
3
(☞p. 43) for instructions on
4
When "E-5" or "E-9" is displayed:
1
2
3
to select "EXIT."
4
to terminate YPAO, and
When "E-10" is displayed:
1
2
3
4
kCursor E
Press to select "RETRY."
kENTER
Press to use YPAO again.
Press kENTER.
Check that the environment is suitable for
accurate measurement.
kCursor D / E
Press to select a option.
PROCEED:
When "E-5" is displayed, measurement can proceed.
However, the measurement in noisy environment may
reduce the accuracy.
When "E-9" is displayed, resume the aborted step.
RETRY:
Restart measurement from the beginning.
kENTER
Press to execute the selected
option.
Press kENTER.
kCursor E
Press to select "EXIT."
kENTER
Press to terminate YPAO, and
switch the unit to standby mode.
Turn on the unit and use YPAO again.
CONNECTIONS
Setting up the speaker parameters automatically (YPAO)
■
When a warning message is
displayed after measurement
See "Warning messages" (☞p. 43) for instructions on
resolving the problem. The speaker causing the problem
can be confirmed from the TV screen display.
NOTE
Although the results of acoustics measurement can be
applied when a warning message is displayed, optimal
sound will not be achieved. Resolving the problem
and using YPAO to measure acoustics again is
recommended.
To exit YPAO with some options
kCursor B / C
Use to select "Save/Exit"
1
and press kENTER.
kCursor D / E
2 Use to select one of the
following options and press kENTER.
SAVE:
Exits YPAO applying the results of measurement.
CANCEL:
Returns to the previous screen (warning message
screen).
EXIT:
Exits YPAO without saving the results.
42
En