Extended Functionality That Can Be Configured As Needed (Advanced Setup Menu); Displaying/Setting The Advanced Setup Menu; Setting The Impedance Of Speakers - Yamaha RX-A1000 Owner's Manual

Av receiver rx-a1000
Hide thumbs Also See for RX-A1000:
Table of Contents

Advertisement

Extended functionality that can be configured as needed (Advanced Setup menu)

The Advanced Setup menu can be used for unit initialization and other useful extended functions. The Advanced Setup menu can be operated as follows.
Displaying/Setting the Advanced Setup
menu
Switch this unit to the standby mode.
1
Press MAIN ZONE A while pressing and holding
2
STRAIGHT on the front panel.
Release STRAIGHT when "ADVANCED SETUP" is displayed
on the front panel display.
After a few seconds, the top menu items are displayed.
MAIN ZONE A
STRAIGHT
PROGRAM l / h
J
1 :
For detailed procedures of speaker impedance settings, refer to "Changing
speaker impedance"
(☞p.
20).
Press PROGRAM l / h repeatedly to select the item
3
to be set from the following items.
In the Advanced Setup menu, you can set the following settings.
SPEAKER IMP.
Sets the impedance of speakers.
REMOTE SENSOR
Activate or deactivate the signal-receiving capability
of the remote control sensor.
REMOTE CON AMP
Changes the remote control ID of a receiver.
TV FORMAT
Specifies the TV's color encoding format.
MONITOR CHECK
Removes the up-scaling limitation on HDMI video
output.
RECOV./BACKUP
Save and restore the settings of this unit.
INITIALIZE
Initializes various settings for this unit.
FIRM UPDATE
Update the firmware of this unit.
VERSION
Check the version of firmware currently installed on
this unit.
4
Press STRAIGHT repeatedly to select the value you
want to change.
5
Switch this unit to the standby mode, and then
switch it on again.
The settings become effective and the unit is powered on.

Setting the impedance of speakers

S P E A K E R I M P .
8 M I N
Changes the unit settings depending on the impedance of the
J1
speakers connected.
Select the impedance when 6 Ω speakers are
6 MIN
connected.
Select the impedance when speakers above 8 Ω are
8 MIN
(Default)
connected.
SETUP
109
En

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Htr-8063Rx-v1067

Table of Contents