Registering Remote Control Codes For External Component Operations - Yamaha RX-A1000 Owner's Manual

MAIN ZONE 2
CODE SET o
Registering remote control codes
SOURCE RECEIVER p
for external component operations
AV
d
1 2 3 4
5 6 7 V-AUX
The following section describes how to register remote
AUDIO
1 2 3 4
control code using an example of the registration of the
USB NET MULTI DOCK
remote control codes of a Yamaha BD player connected
HDMI OUT
to AV2 jack.
TUNER PHONO
FM AM
• Perform each of the following steps within 1 minute.
PRESET TUNING
INFO MEMORY
Settings will be automatically stopped if more than 1
ENHANCER SUR. DECODE
minute passes since the last operation. To reset, repeat
MOVIE MUSIC
SLEEP PARTY STRAIGHT PURE DIRECT from step 2.
• Remote control code of an external component cannot
SCENE
i
1 1 2 2 3 3 4 4
be set from the name or model number of a unit. Use
BD/DVD BD/DVD TV TV CD CD RADIO RADIO
"Remote Control Code
ON SCREEN OPTION
search the available remote control codes from the
ENTER VOLUME
category or manufacturer of external components.
RETURN DISPLAY
• If multiple remote control codes exist, first set the first
code in the list, if it does not work then try the other
TOP
POP-UP
MUTE
MENU MENU
codes.
REC
1 2 3 4
m 1 Use "Remote Control Code
5 6 7 8
ROM to search the available remote control
9 0 10 ENT
codes from the category or manufacturer of
TV
external components.
INPUT
n
TV VOL TV CH
MUTE "2064" can be used for a Yamaha BD player.
d
AV2
i
SCENE
m
Numeric keys
n
TV control keys
n
A
o
CODE SET
p
SOURCE/RECEIVER
J
1 : To control a TV that is not the input source, press
control keys) in step 3.
J
2 :
To control a TV that is not the input source, enter the TV remote
control code in step 4.
2 Press
such as the tip of a ballpoint pen.
3 Press
AV2.
Perform the following steps to register the selected
input source here to the remote control code.
Search" in the CD-ROM to
Search" in the CD-
n n
A
( TV
Controlling the remote control to operate various functions
oCODE SET
using a pointed object
blinks twice
MAIN ZONE 2
CODE SET
SOURCE RECEIVER
AV
1 2 3 4
dAV2
to switch the input source to
J1
SETUP
4 Enter a remote control code "2064" using
J2
mNumeric keys.
2 0 6
Once the remote control code is registered successfully
p
SOURCE/RECEIVER will blink twice.
Registration successful: blinks twice
Registration failed: blinks 6 times
MAIN ZONE 2
CODE SET
SOURCE RECEIVER
AV
1 2 3 4
• If the registration fails, repeat from step 2.
• In case of an external component with multiple remote
control codes, the other remote control codes may be
supported. Repeat from step 2 with the other remote
control codes.
5 To switch between BD player linked to
iSCENE
scene selections, press
same time press dAV2 and hold it for
approximately 3 seconds.
Then you can operate the external components by
switching the input source to AV2, or selecting AV2 in
the registered scene.
Same steps for operating other external components,
i
SCENE
press and at the same time press the input
source key selected in step 3 and hold it for
approximately 3 seconds.
En
4
and at the
107