Changing Input Settings With A Single Key (Scene Function); Registering Input Sources/Sound Program; Enjoying The Desired Sound Field Effect; Selecting Sound Programs And Sound Decoders - Yamaha RX-V667 Owner's Manual

Changing input settings with a single key (SCENE function)

MAIN ZONE 2
CODE SET
RECEIVER
SOURCE
This unit has a SCENE function that allows you switch this unit on and change input sources and sound programs with one key.
HDMI
1 2 3 4
AUDIO
Four scenes are available for different uses, such as
5 V-AUX 1 2
AV
playing movies or music. The following input sources
d
1 2 3 4
and sound programs are provided as the initial factory
5 6 MULTI DOCK
settings.
TUNER SIRIUS [ A ]
CATEGORY
FM AM
PRESET TUN./CH
INFO MEMORY
SCENE
ENHANCER SUR. DECODE
MOVIE MUSIC
g
SLEEP STRAIGHT PURE DIRECT
BD/DVD
SCENE
i
BD
TV CD RADIO
DVD
TV
OPTION
ON SCREEN
CD
RADIO
ENTER VOLUME
RETURN
DISPLAY
TOP
POP-UP
MUTE
MENU MENU
REC

Enjoying the desired sound field effect

1 2 3 4
5 6 7 8
This unit is also equipped with a Yamaha digital sound field processing (DSP) chip. Multi-channel playback from almost any audio source can be enjoyed using a variety
9 0 10 ENT
of sound decoders and various sound field effect programs stored on the chip. Sound field effect programs built into this unit are called "sound programs."
INPUT
Selecting sound programs and
MUTE
sound decoders
d
This unit offers sound programs in many different
Input selector
g
categories suitable for movies, music and other uses.
Sound selection keys
i
Choose a sound program that sounds best with the
SCENE
source you are playing back, rather than relying on the
name or explanation of the program.
Compressed
Sound Music
Input
program Enhancer
mode
HDMI1 Drama Off
AV4 STRAIGHT On
AV3 STRAIGHT Off
TUNER STRAIGHT On
Registering input sources/sound
program
dInput selector
1 Use to select the input
source you want to register.
Use the gSound selection keys to select
2
the sound program or Compressed Music
Enhancer mode you want to register.
• Sound programs are stored for each input source.
When you change the input source, the sound program
previously selected for that input source is applied
again.
• When you playback DTS Express sources or audio
signals with sampling frequency of higher than
96 kHz, the straight decoding mode (☞p.
automatically selected.
• When you playback DTS-HD sources with CINEMA
DSP, the DTS decoder is automatically selected.
PLAYBACK
iSCENE
Press the
3
Complete" appears on the front panel
display.
SCENE1
SET Complete
Release the key when "SET Complete" is displayed
• When changing "SCENE," also change the external
component that the remote control operates
• Selecting a scene and editing the scene function are
also available in the SCENE menu
42) is
key until "SET
VOL.
SW
C
R
L
SL SR
SBL SBR
(☞p. 96).
(☞p. 76).
Continues to the
next page
41
En