Changing Input Settings With A Single Key (Scene Function); Registering Input Sources/Sound Field Program; Enjoying Sound Field Programs; Selecting Sound Field Programs And Sound Decoders - Yamaha HTR-5063 Owner's Manual

Changing input settings with a single key (SCENE function)

TRANSMIT CODE SET
SOURCE RECEIVER
SLEEP
This unit has a SCENE function that allows you switch this unit on and change input sources and sound field programs with one key.
HDMI
1 2 3 4
AV
Four scenes are available for different uses, such as
1 2 3 4
AUDIO
playing movies or music. The following input sources
d
5 6 1 2
and sound field programs are provided as the initial
V-AUX [ A ] [ B ] DOCK
factory settings.
TUNER
FM AM
SCENE
PRESET TUNING
INFO MEMORY
BD/DVD
ENHANCER SUR. DECODE
MOVIE MUSIC STEREO
g TV
STRAIGHT DIRECT
CD
SCENE
h
BD
TV CD RADIO
DVD
RADIO
SETUP OPTION
ENTER VOLUME
RETURN
DISPLAY
TOP POP-UP
MUTE
MENU MENU

Enjoying sound field programs

REC
This unit is also equipped with a Yamaha digital sound field processing (DSP) chip. You can enjoy multi-channel playback for almost any sound source using various
1 2 3 4
sound field programs stored on the chip, and a range of sound decoders.
5 6 7 8
9 0 10 ENT
Selecting sound field programs and
TV
INPUT
sound decoders
TV VOL TV CH
MUTE
This unit offers sound field settings (sound field
programs) in many different categories suitable for
d movies, music and other uses. Choose a sound field
Input selector
g
program that sounds best with the source you are playing
Sound selection keys
h
back, rather than relying on the name or explanation of
SCENE
the program.
Input Sound field program
HDMI1 Straight
AV4 Straight
AV3 Straight
TUNER 7ch Enhancer
Registering input sources/sound
field program
dInput selector
1 Use to select the input
source you want to register.
Use the gSound selection keys to select
2
the sound field program you want to
register.
• Sound field programs are stored for each input source.
When you change the input source, the sound field
program previously selected for that input source is
applied again.
• When you playback DTS Express sources or audio
signals with sampling frequency of higher than
96 kHz, the straight decoding mode (☞p.
automatically selected.
• When you playback DTS-HD sources with CINEMA
DSP, the DTS decoder is automatically selected.
Continues to the
PLAYBACK
hSCENE
Press the
3
Complete" appears on the front panel
display.
SCENE1
SET Complete
Release the key when "SET Complete" is displayed
When changing "SCENE," also change the external
component that the remote control operates
31) is
next page
key until "SET
VOL.
SW
C
R
L
SL SR
SBL SBR
(☞p. 63).
30
En