Connecting The Fm/Am Antennas - Yamaha RX-A1000 Owner's Manual

Connecting the FM/AM antennas

An indoor FM antenna and an AM loop antenna are supplied with this receiver. Connect these antennas
properly to their respective jacks.
Indoor FM antenna
DOCK NETWORK
AV 1 AV 2 AV 3 AV 4
(1 BD/DVD) AV OUT
PHONO
GND
COAXIAL COAXIAL OPTICAL OPTICAL
FM (4 RADIO)
GND AM
75
Connecting the AM loop antenna
Press and hold
Assembling the AM loop antenna
AM loop antenna
Position the AM antenna away from the receiver. The
wires of the AM antenna have no polarity.
You can connect either wire to the AM jack or the
GND jack.
HD
HDMI OUT
AV 1 AV 2 AV 3
1 2
(1 BD/DVD)
ARC SELECTABLE ARC
COMPONENT VIDEO
MON.OUT/ZONE OUT
Y P P Y P P
B R AV 3 B C R
AV 1
A
M
Y
AV 2
B
D
AV 4
AUDIO 1 AUDIO 2 AUDIO 3 AUDIO 4 MULTI CH INPUT
(2 TV) (3 CD) CENTER ZONE OUT
FRONT SURROUND SUR. BACK SUBWOOFER
ZONE 2
OPTICAL COAXIAL
SURROUND
Insert Release
■ Improving FM reception
We recommend using an outdoor antenna. For more information, consult the nearest authorized
dealer.
■ Improving AM reception
Connect this unit to an outdoor antenna with a 5 – 10 m vinyl-coated wire. Make sure the AM loop
antenna is still connected.
Connecting the GND jack can reduce noise. Connect the jack to a store-bought ground bar or copper
plate with a vinyl-covered wire and bury this new attachment in moist ground.
The GND jack is not to be connected to the ground socket of an electrical outlet.
CONNECTIONS
36
En